- My Shopping Cart
- Total: $0.00
BeastX Microbeast Flybarless Unit
With your purchase, receive at no cost:
This is the MICROBEAST 3 axis flybarless gyro system from BeastX, (BEAbsolutelySTable). The MICROBEAST is highly regarded as one of the best flybarless systems available in the world! Flybarless technology allows both nitro and electric helis to fly without the mechanical flybar. Flybarless flight provides more power and combines the best of both worlds in stability and agility. It also allows for a far more simple head design with fewer mechanical parts to break. The MICROBEAST is housed in a single compact aluminum case and can be mounted either horizontally or vertically allowing it to fit almost any RC Helicoper. The sensor system used is based on the newest MEMS technology. The MICROBEAST is able to use many types of receivers and signals including standard PPM, Futaba S-BUS and Spektrum. With the optional Spektrum Satellite Adapter, installation in indoor model helicopters is also possible with a minimum number of wires (limited to a single external receiver at this time). Initial installation and setup are extremely easy task because of the simple but efficient LED indicator system used to program the MIRCOBEAST. This also means programming changes can be made at the field without the need of a PC, laptop or external console! An optional USB cable is available for future PC control and for updating the firmware. With an optional adapter cable, the MICROBEAST can also be utilized solely as a tail gyro. This is recommended for those switching from the conventional flybar system who want to slowly approach the RIGID operation with the 3 axis solution. MICROBEAST's integrated swashplate mixer also enables the use of simple remote control systems which do not have their own swashplate mixing.
Click HERE for more information on how to setup the BeastX Microbeast Flybarless Unit.
- Single unit, no additional sensors to install
- Aluminum and composite case
- Lightweight (28g)including mounting pad and wires
- Suitable for Nitro or Electric use
- Multiple mounting positions
- Simple programming without PC, laptop or console
- PPM / S-BUS / Spektrum satellite receiver compatible
- Compatible with 90, 120, or 140 degree swashplates
- Operating Voltage: 3.5V-8.5 VDC
- Processor: 32Bit ARM
- Analog Processing: 17Bit
- Sensor Technology: 3 MEMS angular rate sensors
- Adjustable Servo Center Pulse Width:
- Tail: 760μs / 960μs / 1520μs
- Adjustable Servo Pulse Rate:
- Tail: 50 Hz / 165 Hz / 270 Hz / 330 Hz
- Swashplate: 50 Hz / 65 Hz / 120 Hz / 200 Hz
- Built-In Swashplate Mixer: Mechanical / 90° / 120° / 140°
- Serial Pulse Input: PPM / S-BUS / Spektrum-satellite*
- Size: 34 x 25 x 13.5mm
- Weight Without Cable: approx. 20 g
This product will be in stock on Monday, October 27 2014.
Domingo Encarnacion jr
very easy to set up it's super stable and the best part of all no computer is needed for set up.
Once you read the manual a couple times, set-up is super easy. I left the potentiometers at factory default on my Trex 500 for the first flight and it was almost dead-on perfect. Just dialed pot# 1 down a tiny bit and pot# 2 up a tiny bit and its perfect. This is my first flybarless set-up so I have no reference to compare it to, but after flying a flybar'ed 450, its WELL worth the money. Its pretty neat that you don't have to do ANY trimming on the TX, the only thing you have to worry about on your TX set-up is the tail gain and pitch curves. (no governor but most ESCs now will have a built-in governor).
Awesome FBL system. Get the 7200bx if your using a spektrum Radio saves you money. I have this unit in my rave 450 and just using a dsmx sat for the reciever. Works awesome a lot easier then flybar to fly. Just make sure you got your servos specs written down so you can enter them on the setup stage.
A lot of bang for the buck. Initial set up was a bit involved but it's small size made it a great candidate for converting my Gaui 200.
The best in my opinion FBL system is very easy to configure, and works perfectly.
Yakıtlı modelimde titreşimden dolayı memnun kalmadım.. Fakat elektrikli modeller için çok iyi bir seçim.
Customers that bought this also purchased...
Free Shipping! Restrictions Apply
MAP Price: $199.99
Out Of StockYou may back order this item, and you will be notified when it arrives in stock.
ETA: Oct 27, 2014
This item earns up to 200 Customer Reward points Learn More