Browse Departments

Dynamite 1/8 Buggy or Truggy Wheel/Tire Balancer

Read Reviews
Write a Review
With your purchase, receive at no cost:
Looking for an easy and affordable way to increase the handling and stability of your 1/8 scale buggy or truggy?  Look no further as Dynamites Wheel/Tire balancer makes balancing your wheels/tires a breeze.  Engineered specifically for 1/8 scale buggies and truggies, Dynamite's Wheel/Tire balancer provides an easy way to balance your 1/8 vehicles wheels in a matter of minutes. Unbalanced wheels/tires can rob your vehicle of its full performance potential and can decrease fuel efficiency.  Eliminate these problems and leave the competition in the dust by keeping your vehicles wheels balanced.

  • Balances wheel/ tire assemblies for 1/8th scale buggies and truggies.
  • Extends the life of your tires, bearings, and driveline components.
  • Improves vehicle traction, stability, and speed.
  • Improves shock absorber action
  • Balancer can be easily disassembled for easy transport and storage

This product was added to our catalog on June 25, 2009.

Luis P Martinez
this balancer works great! only after doing just two easy tweaks ,before assembling it remove plastic dirt shields and discard them ,rinse off bearing w/lacquer thinner to remove any grease or heavy oil ,after blowing dry ,lube w/ automatic transmission fluid [its very thin weight]
Manson Beaty
Verified Owner
Works great and a great price. I didn't change the bearings and it works great for me.
Rafal Balcerzak
Verified Owner
Warning :-) If u want to buy one, you have to replace bearings (2 standard 8x16) before asembling. Those that comes with balancer are the chaepest, slowest, high resistance bearings with rubber (!!!?) seal. And it is just impossible to balance any wheel with that. I use two medium class refubrished (by myself) bearings and balancer works perfectly.
Matt Grixti
Verified Owner
The only problem with this balancer is that you have to replace the bearings before using it as the ones that come with it are just too slow and have to much resistance in them but other than that its a great balancer once the bearins are replaced
Verified Owner
I have had this balancer for over a year now and works great, I replaced the bearings with some ceramics I had around. The stock bearings will work fine once you do the things the other reviewers mentioned ie shield removal and cleaning grease out(had to do it to the ceramics as well). I like the stand, it is sturdy and precise in it's machining as it spins true.
Robert Pressley
Verified Owner
This item is well worth it. VERY sturdy design. I agree with everyone about the bearings. I actually had better luck taking off the rubber seals, using nitro cleaner to get out all of the grease, and then putting 1 drop of household 3-n-1 oil in each. Also I did not re-seal the bearings. They are VERY smooth this way, and it works like a charm.
Adam Niedling
After cleaning out the bearings it works great. Good buy.
Adam Lynch
Verified Owner
Thankyou to the poeple who posted about the bearings. I was utterly dissapointed when I spun up the first buggy wheel. Then I was stoked to find the solution on here. You can use the bearings which come with it, you just need to remove rubber seals and clean out the grease, replace with oil. Thanks again. :)
Richard Hurtado
Verified Owner
Followed the advice of other users. Once the rubber seal was removed balancer worked flawless!!!!!
Will Heuser
Agree, the bearings don't rotate freely, thus preventing the lighter buggy tires from balancing. I removed the rubber seal from the bearings and now it is hooked up. Great buy versus other balancers.
James K
Money to function ratio I think its a bit expensive. Since the tool is dependent on bearings to balance the wheels, there is actually too much friction within the bearings for this setup to actually find the heaviest part of the wheel even though bearings are well lubricated. In hindsight I would THINK I have NOT tried it that an airplane prop setup would work more acurately.
Verified Owner
Works great. Uses regular 8x16 bearings. Cheaper than hudy. This is my first balancer and balancing tires is simple. I also used the dynamite lead tape.

Free Shipping! Restrictions Apply

List Price: 
You Save: 
$2.50 (6%)
In Stock!
This item earns up to 40 Customer Reward points Learn More

Manufacturer Info

Browse other products from Dynamite