Browse Departments

E-flite Extra 260 3D 480 ARF

[EFL2475]
Read Reviews
(2)
Write a Review
With your purchase, receive at no cost:
The E-Flite Extra 260 3D 480 ARF is one of the first E-flite® planes to use a new construction technique that eliminates unnecessary weight without sacrificing any strength. This super-lightweight construction, combined with its generous wing area, results in exceptionally light wing loading. Plus, its firewall is designed to accept E-flite’s powerful Park 480 Brushless Outrunner Motor, without modification. It all comes together to give you a fantastic flying 3D airplane without limits and with nothing but possibilities.

Features
  • Generous wing area for lighter wing loading
  • Large control surfaces for precise control in high-alpha flight
  • Exceptionally lightweight balsa and plywood construction
  • Designed for use with E-flite’s Park 480 brushless outrunner motor
  • Factory-painted fiberglass cowl and wheel pants
  • Aluminum landing gear and steerable tail wheel
  • Plug-in wings for easy transport
  • Assembles in just a few evenings
  • Covered in genuine UltraCote® and UltraCote Lite

Specifications:
Wing Span: 43 in (1090mm)
Overall Length: 40 in (1015mm)
Wing Area: 375 sq in (24.2 sq dm)
Flying Weight: 26–29 oz (740–820 g)
Motor Size: Park 480 BL Outrunner
Radio: 6 channels or more for proper mixing
Servos: Sub-micro (4)
CG (center of gravity): 3 inches (75mm) to 3 1/8 inches (79mm)
Prop Size: 12x6 Electric
Spinner Size: 1 3/4 in
Hardware Included: Yes
Speed Control : 35A-40A Brushless
Recommended Battery: 1320-2100mAh 11.1V 3-cell Li-Po
Control Throw (Ailerons): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
Control Throw (Elevator): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm)
Control Throw (Rudder): Low 1-1/2-inch (38mm) or High 2-1/2-inch (64mm)
Scale: Park Flyer
Approx. Assembly Time: 4-6 hours

Needed to Complete:

  • 6-channel transmitter (for proper mixing and dual rate capabilities)
  • Micro receiver
  • 4 sub-micro servos
  • Park 480 BL Outrunner Motor
  • 40A Brushless ESC
  • 12x6 Electric Propeller
  • Battery & Charger 

This product will be in stock on Monday, December 29 2014.

Paul E.
This plane is an awesome flyer-all around good buy. I'm using it to learn 3d and it certainly has been an excellent trainer (I need a LOT of help). Light, very maneuverable on the ground and in the air. Has no bad habits on takeoff or landings. Like most very light planes, be careful in moderate wind on your downwind turns until you get the feel for it. My only complaint is the covering. I keep tightening it up with my iron and it gets loose again. Included hardware is very good. A good buy! Using Axi 2814-16, TG MG servos, 26x6 APC Electric, 40A Plush ESC, HK ultra small 3a BEC, and 3S 35 & 45C NanoTechs. Good threads on RC groups on this plane.
joshua jones
Awesome machine,not heavy at all so there is plenty power and she doesnt have any problems with landings.

Free Shipping! Restrictions Apply

List Price: 
$209.99
Price: 
$149.99
You Save: 
$60.00 (29%)
Quantity:
Out Of Stock
You may back order this item, and you will be notified when it arrives in stock.
ETA: Dec 29, 2014
This item earns up to 150 Customer Reward points Learn More

Manufacturer Info

Browse other products from E-flite