Browse Departments

Hitec HS-7950TH High-Voltage 7.4V Mega Torque Digital Servo

Read Reviews
Write a Review
With your purchase, receive at no cost:
This is the Hitec HS-7950TH High-Voltage Mega Torque Digital Servo. This is the most powerful servo Hitec has produced to date. The "Ultra Torque" HS-7950TH is designed to operate on a two cell LiPo Pack! Featuring Hitec's high resolution "G2" second generation programmable digital circuit and their indestructible Titanium gears, the HS-7950TH has the performance and durability you've come to expect from a Hitec servo. Other features in the HS-7050TH include a 7.4v optimized coreless motor, integrated heat sink case, and a top case with two hardened steel gear pins supported by axial brass bushing. 

The HS-7950TG has been designed for the most demanding hobby applications including the largest aircraft and monster trucks. Featuring a titanic 403oz./in. of torque at 6.0 volts, while still maintaining a respectable 0.15 second transit time

Programmable Features:

  • Dead Band Width
  • Direction of Rotation
  • Speed of Rotation (slower)
  • End Points
  • Neutral Points
  • Fail Safe On/Off
  • Fail Safe Point
  • Resolution* (default is high resolution)
  • Overload Protection* (default is off)

*These features are only programmable with the HFP-20, HPP-20 or HPP-21 programmers.


  • G2 Digital Circuit
  • Titanium Gear Train (MK first gear)
  • Ultra Performance Coreless Motor
  • Heatsink Case
  • Hardened steel gear pins Supported by Axial Brass Bushings
  • (8) O-Rings for Water/Dust/Fuel protection
  • Dual Ball Bearing Supported Output Shaft


  • Size Category: Standard
  • Type: Digital
  • Application: Larger Air and Surface products
  • Torque: 347/403/486 oz./in. (4.8v/6v/7.4V)
  • Speed: 0.19/0.15/0.13 sec @ 60 deg. (4.8v/6v/7.4V)
  • Weight: 2.34oz (66 g)
  • Bushing Or Bearing: Bearing
  • Bearing: Dual
  • Motor Type: Corless
  • Gear Type: Metal
  • Gear Material: Titanium Gear Train (Metal Karbonite first gear)

This product was added to our catalog on September 3, 2009.

Very very good servo.... I have 4 of this servo... Very powerful and very fast.... Very good for Off-road monster, truggy and buggy...
Aaron Weigand
Verified Owner
My first 7950 was purchased Sep 2009 and just failed two weeks ago (didnt want to center properly). I just cant say enough good about the servos. I have two of them running in 1/8 buggy and truggy and they have just been great. I never worry about them. I picked up another after the failure and just sent the original in for repair so I'll have a backup now. Hitec's customer service is second to none in this industry. Forgot to add that it always centers perfect.
Luke Holman
WOW this thing has monster amounts of power. Running it on a losi night crawler with rover tires. Snapped a couple plastic horns before I went to aluminum. I would Definetly recommend this product.
Brandon Siegel
Verified Owner
Outstanding servo which took a severe beating this past season during a few 'highlight reel' crashes. Having used the older 5955/7955 with great success, I never thought I would find a better servo, until now. No more LiPo regulator and this servo works flawless with my M11x. Great will not be disappointed with this one!
Giancarlo Fiorani
the strongest servo I've ever owned i have a truggy and i was having trouble with my steering this servo solved all my problems
Jim van Dijk
Verified Owner
Got 2 of these installed on my 4 linked F350 Hilift fitted with a 2S 5000mah 40c Lipo. it steers at ANY time. even if the tires are under heavy load and right next to a rock. it will either push itself or the rock away! amazing! great servo for any rock crawler thats for sure.
Ronald Fleck
All I cna say is if your servo saver can handle it, tighten it up. This servo is absolutely sick!
martin lenneville
very fast and very strong, it keeps speed even with a heavy weight .on a truggy is perfect and very pleasant to drive
yes the best servo made!! these babies have the power to slice a finger off with aluminium horns! got to love that
Koby Kubrin
Verified Owner
This servo is incredible! It is the perfect truggy steering servo! Running on a 7.4v 2s lipo the numbers are staggering and it means business! I wouldn't run any other brand servo! These new HV servos are a great upgrade from the already amazing 7955's. I wouldn't have believed there could be a better servo until these came about.

Related Products

Free Shipping! Restrictions Apply

List Price: 
You Save: 
$87.96 (37%)
In Stock!
This item earns up to 150 Customer Reward points Learn More

Manufacturer Info

Browse other products from Hitec