Browse Departments

ProTek R/C 130SS Standard Digital "Super Speed" Metal Gear Servo (High Voltage)

[PTK-130SS]
Read Reviews
(8)
Write a Review
With your purchase, receive at no cost:

This is the ProTek R/C 130SS Digital Super Speed Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.

The ProTek R/C 130SS High Voltage Super Speed servo delivers lighting fast 0.06 transit speed and 211 oz-in of torque at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 0.05 and 260 oz-in! Spec's like these make this servo an excellent choice for any 1/10 to 1/8 scale vehicle application. Other features include a full metal gear train that is supported by dual ball bearings, a 200mm long 22awg connector wire with gold plated connectors, a coreless motor and an aluminum middle case that helps to dissipate heat and helps to increase efficiency.

Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.

Warning! This ProTek R/C servo requires that you use a m3x10mm screw to attach the servo horn to the output shaft. If you choose to use another screw, be sure to use a 10mm length screw. Use of a shorter screw can cause failure and will void your warranty.

Features:

  • Ideal for any 1/10 to 1/8 scale vehicle application
  • Aluminum middle case
  • High voltage circuitry
  • 0.06 transit speed, and 211 oz-in of torque @ 6.0V
  • 0.05 transit speed, and 260 oz-in of torque @ 7.4V
  • Aluminum single arm servo horn
  • Full metal gears and dual ball bearings
  • 200mm long 22awg connector wire w/gold plated connectors
  • Coreless motor

Servo Model
130SS
Recommended Application 1/10 to 1/8 scale surface
Operating Voltage 4.8V - 7.4V
Operating Temperature 14 to 140 F (-10 to +60 C)
Operating Speed @ 6.0V 0.06/60 sec
Operating Speed @ 7.4V
0.05/60 sec
Dynamic Torque @ 6.0V
211 oz-in (15.2 kg-cm)
Dynamic Torque @ 7.4V
260 oz-in (18.7 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft 25 Tooth
Gears Metal
Weight 63.8g
Pulse/Frequency
1520μs / 333hz

ProTek R/C is an AMain.com brand.

This product was added to our catalog on April 26, 2013.

Eric Franz
Verified Owner
Was using a Orion 1409 in my Tekno SCT410 and that servo is impressive. Put this one in and the speed is incredible. Very nice included servo horn too. Operates very quietly as well.
Julio Maguina
Verified Owner
Great servo!!! nice torque, awesome speed and also very quiet, This servo replaced my orion 1409 on my D8-e conversion.
Nitro Nerd
Verified Owner
I'm running this as steering for one of my buggies using a LiPO pack, and...oh my this thing is stoopid fast. https://www.youtube.com/watch?v=-C8n9z-8GP8
Wesley Maclean
Verified Owner
amazing servo! smooth and lightening fast! using it in my 1/8th TLR 3.0 ebuggy. I have all savox servos except for this one and i will buy this servo in the future!
chris madsen
Verified Owner
I don't know this other Madsen guy. Lol. Bought this for my Tekno SCT410. Had a DX1015 in it and it was good, but this servo was far better for the same price. 8 months of high speed brutality in the "Mod Rookie" class and zero issues.
Wilson George
Verified Owner
Awesome servo, I bought 2 one for my Truggy and one for my buggy. I have had zero issues with either of them they are fast smooth and quiet. You need to set your end points on them like any servo and make sure that you are not pinging them out to max range on both throttle and brake (I am assuming you are looking at this for a throttle servo). Great servo for the price.
Doug Madsen
Verified Owner
So far so good, I've been running this servo hard for about three months now in a Tekno SCT 410, incredible speed, great torque and silent.
Juan Villalobos
Verified Owner
Loved this servo for about a month and 3 race days in started getting shakes, I hope I just got the one bad one cuz it was working great and and quietly. Is on it's way to amain right now for repair so we'll see how that goes.

Related Products

Free Shipping! Restrictions Apply

Low Price: 
$89.99
Quantity:
In Stock!
This item earns up to 90 Customer Reward points Learn More

Manufacturer Info

Browse other products from ProTek R/C