Browse Departments

SWorkz S104 EK1 1/10 4WD Off Road Racing Buggy Pro Kit

[SWX-910015]
Read Reviews
(3)
Write a Review
With your purchase, receive at no cost:
This is the SWorkz S104 EK1 1/10 4WD Off Road Racing Buggy Pro Kit. The S104 EK1 includes a variety of interesting design features that are unique to 1/10 scale 4wd buggies, including pivot ball front suspension, 14mm 1/8 scale style wheel axles with large diameter wheel hex adapters and wheel nuts, as well as a rear battery mount that can accommodate either a 2S LiPo saddle or 98mm shorty pack! Other features include an incredibly narrow aluminum chassis with a weight forward component layout, and silver carbon fiber shock towers. Plus, the rear shock tower features a unique design that incorporates a lower aluminum camber link brace for added rigidity. 14mm aluminum body, threaded big bore shocks will soak up the bumps and hard landings, and the mud deflectors help protect the shock shafts and seals from dirt and other contaminants.

Two aggressively shaped cab forward bodies are included, one for saddle packs, and one for shorty packs, as well as add-on polycarbonate dirt shields that attach to the main chassis plate and help to keep the chassis free of contaminants. Another innovative feature that is included as standard equipment is the SWorkz X-system transmission. The X-system is incredibly durable and delivers excellent acceleration. Combine this with oil filled gear differentials and the S104 EK1 will provide good traction and balance on any off road track.

Features:
  • Pivot ball front suspension
  • 14mm 1/8 scale style wheel axles, wheel hex adapters and wheel nuts
  • Battery mount that can accommodate either a 2S LiPo saddle or 98mm shorty pack
  • Weight forward component layout
  • Silver carbon fiber shock towers
  • 14mm aluminum body, threaded big bore shocks with shock shaft guards
  • X-system transmission
  • Oil filled differentials
Specifications:
  • Length: 380mm
  • Width: 245mm
  • Height: 170mm
  • Ground Clearance: 50mm
  • Wheelbase: 275-278mm
  • Track:
    • Front: 223mm
    • Rear: 223mm
  • Gear Ratio:
    • Center: 86 - 88T
    • Front/Rear: 42/17T
  • Weight: 1720 - 1830g
Needed to Complete:
  • 2 Channel Radio System
  • Motor & Electric Speed Control
  • Steering Servo
  • Tires
  • Pinion Gear
  • Polycarbonate Paint for Body
  • 2S LiPo Battery Pack (Saddle or Shorty)
  • Compatible Battery Charger 

This product was added to our catalog on October 1, 2013.

Brett Blum
Verified Owner
This car is incredible! It has a ton of steering and traction. Its extremely durable and well built. The only negative is the limited space for electronics. I own all the Sworkz vehicles and they are all top notch. Is this car better than the b44.1 or b44.2? Yes!! I have run almost every 4wd buggy and this is hands down the fastest and the smoothest. People are trying to say its like a durango...No way! I ran a durango and the durango cant even touch this car. I run on low to medium bite clay track and this car is stupid good. If you are running on this type of surface get the softer springs and go way softer than the shock oil they supply.
Thomas Holand
We are running this car on high grip carpet here in Norway. The Xray xB 4 is not any faster. Check out our facebook page:sworkz norway for setup sheets!
jason christie
Awesome car! The gear diffs and gear case are beautifully designed. It is literally a shrunk down 1/8 e buggy. The car has tons of droop with front and rear droop screws, the suspension is very plush. I weighed it on 4 scales and it is very balanced. The carbon fiber is of great quality. The car has great turn in and will rotate and pivot on command. The steering is very linear and precise. All the cvd joints are captured and all the hing pins are capture like an e buggy. There are inserts for the hing pin holders to adjust anti squat, toe in, kickup ect ect...... The car is very easy to drive and is very well manured. The new breed of 1/10 wheelers has arrived......
Richard Hess
Verified Owner
In a class were you need durability, this car shines.... 8th scale durability... plenty of tuning options included in the kit .....car handles great I'm very happy with the car hopefully Amain continues to carry parts and update's
philippe Schlafmunter
Impossible to make a acceptable setup for carpet and Astro :-(( to much steering, and a rear roll center definitively to high !!! very disappointed by this car, not comfortable, not sure, to nervous around neutral I regret my Yokomo more drivable. since two races I became a "B" main driver...it's a pity...since 3 years, I was a "A" main driver with my "old" Bmax2... I'll change for another car in 2014, looking for the new Bmax3 or HPI D413, clearly with a better conception ;-) Good luck to all if you run on high grip track...and if you can, don't bought this car...excepted if your name is "Masami, Naoto, mayfield or Cavalieri"...LoL...I'm not, I'm just a human...not a E.T... Best regards from France ;-)

Free Shipping! Restrictions Apply

MAP Price: $349.99
Quantity:
In Stock!
This item earns up to 350 Customer Reward points Learn More

Manufacturer Info

Browse other products from SWorkz