This is the Team Integy Universal Off Road Setup Station. This all in one off road setup system is used to measure Caster, Camber, Toe and Steering Throw Symmetry on off road vehicles. From 1/8 scale buggies and trucks, to 1/10 buggies and monster trucks that previously could not use a setup system due to the axle size, now there is a single setup system that is compatible with all of them, with the addition of the optional adapter sets. From 1/8 scale to mini's, this is the most flexible setup system ever produced!
Type C Adapters (C23130) Fit: Traxxas: Stampede, Rustler, Slash, Jato; HPI: Firestorm, Blitz, Brama 10B, Cyber 10B; 1/10 Touring and Drift Cars, as well as other vehicles with the same size axles.
Type D Adapters (C23131) Fit: Associated: RC18T, RC18B; Losi Mini-T, Mini-LST, as well as other 1/18 vehicles with the same size axles.
Type E Adapters (C23132) Fit: Associated: B4, T4, SC10, as well as other 1/10 vehicles with the same style axles.
Type J Adapters (C23344) Fit: Traxxas 1/16 scale vehicles.
NOTE: Instructions not included.
This product was added to our catalog on April 29, 2010.
Quality and ease of use is what I can say about this station. As its my first one ever to use. It was a brease. Took me about 20 min after setup to get everything dialed as I watched football. Just remember to adjust, settle suspension. Recheck, then fine tune. A must have to keep your Truck/Buggy ect. tracking straight and getting the most out of your setup. It is a bit pricey. After the first use I feel it was money well spent. I would highly recommend it!!
I set up my E-Revo 1/10 the first time for 20 minutes. I am very pleased !
Its a good setup system with all the needed equipment to for my 1/8th scale truggy and buggy. The only issue that I have with the system are the bearings that go over the wheel shafts. They pop out when trying to remove or install. Other than that I love the price compared to the other systems out there. It comes in a nice case to keep it organized and in good shape.
Team Integy C23344 is the part number u need and this will work for 1/10th buggys my setup station works grate for my sc trucks. http://www.integy.com/st_prod.html?p_prodid=8758&-
amp;p_catid=163 this is the link for the part.
Yeah bought one of these also, no INSTRUCTIONS WTF!!!! Then they expect you too pay for advice, I dont think so. Please bring out some instructions, it would make life just that little bit easier.
Not sure how others can review this as junk. Even without instructions (yes it should have something) it is easy enough to figure out and use. Makes a world of difference vs using a plastic camber gauge and steel ruler. Finally I know the toe in/out of my cars and the camber is much more accurate than my plastic Losi gauge.
My only complaint is that the adapters for use with the AE B4 are not correct for the newer cars with hexes, an original B4? Yes B4.2 or any version upgraded to hexes? No. But that is a complaint for the accessory not the setup station.
Gracias, pero pueden explicar en español, recuerden que el mercado latino es enorme.
quiero saber si me peuden enviar las agujas que marcan, si ponen el nombre de cada parte la puedo identificar para indicarlas
This thing is junk! Do not buy it if you plan on using it with 1/10 scale buggy, truck or SC. You cannot measure toe or steering throw symetry on 1/10 scale. One adapter had no threads machined. Typical Integy, no instructions and good luck getting ANY information from them in the form of tech support. I will be sending back or put it up for sale ASAP. It will work on 1/8 scale and monster trucks, but not on 1/10, as advertised. I've never given feedback before on anything, but this is bad. What a waste of money.
Je cherche un banc de réglage pour un Xray XB4 1:10
Le banc Integy me semble convenir, par contre quels adaptateurs faut'il pour le XB4?
Dans l'attente de votre réponse pour pouvoir commander le produit.
Cordialement, Jacques Davan. (France)
Good station. Quality parts, heavy feel good.
A decent set of instructions, parts, general guidelines would be nice. When you buy a 10 dollar part you get some sort of paperwork, with this nothing. Got it figured out and working good, think it is overkill for off road.
Does'nt work with 1/10th scale buggies !!! Can not use it for checking toe in/out. Buy the hudy one may cost more but atleast you can use it.
Not a bad product. I have used it so far to set up my Losi SCTE and it seems to work as advertised. Instructions would be nice and the toe wobbles just a bit when assembled. Throws off toe measurements by about one degree. No problems with build quality otherwise.
Nelson Brancalhão Jr
Good finishing and material, but there's no instructions. Works perfectly with 1/8 buggy.
Ótimo acabamento e bom material, mas sem manual de instruções. Funciona muito bem com meu buggy 1/8.