Browse Departments

Align T-REX 250 Plus DFC Super Combo BTF Helicopter w/3GX MRS/ESC/Motor/Servos & CF Blade

[AGNRH25E03X]
Read Reviews
(4)
Write a Review
With your purchase, receive at no cost:

This is the Align T-REX 250 Plus DFC Super Combo BTF, Bind-to-Fly Helicopter. This fully assembled helicopter includes the 3GX MRS flybarless system, RCE-BL15P ESC and 3600kV 250MX motor. Additionally, 205D carbon fiber main blades, three DS415M digital cyclic servos and one DS425M digital tail servo has been included. This bird needs nothing more to get airborne than plugging in a charged battery and binding your S-FHSS or DSM2/DSMX transmitter. The T-REX 250 PLUS DFC package was assembled and tuned at the factory, so the pilot can eliminate the assembly and adjustment process! Before you can fly, simply bind the model with your ALIGN T6, Futaba S-FHSS, or JR/Spektrum 2.4GHz Transmitter using the manual instructions and you are ready.

The DFC rotor head assembly has been paired with 3GX MRS flybarless system optimized for the T-REX 250 PLUS DFC flight characteristics. Without any adjustment or tuning, this combo will provide optimal stability, suitable for pilots of all levels. But for pilots looking to extract every bit of performance from the helicopter, the 3GX MRS can be fine tuned even more through a few simple steps.

With the addition of the 3GX MRS, the T-REX 250 PLUS DFC pushes past the performance limitation of flybar helicopters, improving both stability and 3D performance, while maintaining a down to earth price level.

Features:

  • T-REX 250 PLUS DFC BTF (Bind To Fly) package is assembled and tuned at the factory. Compatible with Futaba S-FHSS 2.4Ghz system/JR DSM2 and Spektrum DSM2/DSMX system transmitters.
  • Updated linkage rod design, complete assembly increases linkage rod rigidity, allowing the pitch slider (follower) to be omitted, resulting in a head assembly that simplified and rigid.
  • Equipped with newly released 3GX MR flybarless system, with FHSS 2.4GHz buit in receiver. Supports Spektrum DSM2/DSMX or JR DSM2 satellite receivers, providing a simpler and more direct setup, with optimized settings for T-Rex 250 Plus DFC, resulting in more stable and more preferable control feel than ever before.
  • Designed specifically for the DFC rotorhead system, improving the DFC connecting rod's strength and minimizing linkage detachment during extreme flight maneuvers.
  • Material integration technology used in frames, improving rigidity and making maintenance simple.
  • Redesigned removable gyroscope mounting platform integrated with rudder servo mount, effectively utilizes frame’s inner space for simplified maintenance.
  • Redesigned anti-rotation guide.
  • Strengthened landing skids for improved durability.
  • Efficient shaft drive tail system, effectively increases rudder performance and decreases power loss.
  • Torque tube drive gear utilizes the highest spec and superior anti-wear material to increase the overall strength and durability, effectively minimize gear striping and crash damage.
  • Single unit tail belt unit with the new counter weighted tail blade grips make it easier assembly and improving rudder efficiency.
  • Utilizes dual point attachment design for zero play and higher precision control feel.
  • Updated aerodynamic canopy for the ultimate fit.
  • Users must have a certain concept of security to operate the R/C helicopters. Be sure to read and comply with related safety notes of instruction manual before flying.

3GX MRS Specifications:
Operating Temperature:
-10~60 degree
Suitable Voltage Range: DC 3.5~8.4V
Operating current consumption: <100mA @4.8V
Operating humidity: 0%~95%
RoHS certified: Yes
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 37.6x22.4x13 mm Size
Weight: 10g Weight

T-REX 250 PLUS DFC Specification:
Length: 431mm
Height: 150mm
Main Blade Length: 205mm
Main Rotor Diameter: 460mm
Tail Rotor Diameter: 100mm
Motor Pinion Gear: 15T
Main Drive Gear: 120T
Tail Drive Gear: 28T
Drive Gear Ratio: 1:8:4.28
Weight (With Motor): 250g

Includes:

  • (1) T-REX 250 PRO Kit Set
  • (1) 205D Carbon Fiber Blades
  • (1) RCM-BL250MX(3600KV) Brushless motor
  • (1) 3GX MRS Programmable Flybarless System
  • (1) DS425M Digital servo
  • (3) DS415M Digital servo
  • (1) RCE-BL15P Brushless ESC
  • (1) 37mm Tail Blade

Needed to Complete:

  • ALIGN T6 of Futaba S-FHSS 2.4G Transmitter or JR/Spektrum 2.4GHz Transmitter (DSM2、DSMX)
  • Spektrum/JR systems require the use of a Spektrum SPM9645 DSMX remote receiver or Spektrum SPM9545 DSM2 remote receiver
  • Pitch gauge
  • 11.1V 3S Li-Po 850mAh battery & Charger

This product was added to our catalog on June 14, 2013.

Related Products

Super Saver Shipping!

Price: $369.99
Quantity:
In Stock!
Limited Quantities Available.
This item is eligible for Super Saver Shipping Learn More
This item earns up to 296 VIP Reward Points Learn More

Manufacturer Info

Browse other products from Align