- My Shopping Cart
- Total: $0.00
Compass Model Warp 360 Helicopter Kit w/Motor & CF Blades
This is the Compass Model Warp 360 Electric Helicopter Kit, with an included 6S motor and Carbon Fiber blades. The Compass Warp 360 utilizes a single-stage direct belt drive which allows for an extremely quiet and efficient drive-train. The belt itself has been designed for a maintenance free and extremely efficient setup. Belt hop or skipping has been eliminated with the large guide pulleys and reinforced belt design. The rotor head is comprised of a nearly rigid design by Compass Model. This head design provides a level of precision and aggressive response more commonly associated with the larger 90 size electrics, to the 450 size market.
Compass Model did not stop in its pursuit of developing world class R/C model helicopters on its newest model. Compass knew it had to provide its customers the most powerful and precise 450 size helicopter ever developed. To aid in this challenge Compass Model turned to a high voltage power plant. The 6S high-voltage LiPo reduces the current load on the electronics. As the voltage is doubled to a 6S LiPo, the current drops as well as wasted energy, in the form of heat. The energy saved due to the lower heat output allows for the longer flight times compared to a 450’s standard 3-cell LiPo system. The Warp 360 is proving to be the best 450 size electric helicopter ever developed.
- Lightweight design for extreme 3D flights
- Fully Rigid rotor head without feathering shaft and dampeners
- Special ECPPM 120 degrees swashplate
- Aluminum / Carbon Fiber tail rotor
- Extremely strong Carbon Fiber frame
- 7mm Wide motor belt system
- 4mm S2M belt system
- 17mm Tail boom
- 6mm Main shaft
- 4mm Tail shaft
Rotor diameter: 780-800mm
Gear Ratio (16T): 8.44:1:4.8
Take off Weight: app. 850/950g with battery
Motor: Compass SZ 2617
Motor kV (6S): 1200-1400kV
Motor kV (4S): 2100-2300kV
Battery Capacity (6S): 1200-1800mAh
Battery Capacity (4S): 2000-2500mAh
Maximum Headspeed: 3500 RPM
Maximum Collective Pitch: +/- 13°
ESC: Minimum 40 Amp
Main blades: 320-360mm
Needed to Complete:
- Helicopter Transmitter & Receiver
- 450 Class Helicopter ESC
- Flybarless Gyro
- (3) Cyclic Servos
- (1) Tail Servo
- (1) 6S 1000-1300mAh LiPo Battery
- Compatible Battery Charger
This product was added to our catalog on December 11, 2012.
Customers that bought this also purchased...
Super Saver Shipping!
|You Save:||$100.00 (20%)|