Team Losi Racing "Gen III" Radio Tray
[TLR4401]

Average rating: 4.2 of 5 Stars!

Team Losi Racing "Gen III" Radio Tray
Displaying 1 to 12 (of 12 reviews) Result Pages:  1 
Marian Miller - Rating: 5 of 5 Stars! Verified Owner Thursday, January 05, 2012
Well Kaptin Moron unless you have used one you don't even have a clue how awesome these are I think on the big circuit these will help the losi drivers come out on top . I on the other hand bought one and can tell you that with two aluminum rsx ko propo servos my 8ight 2.0 placed up front it handles like never before . The servo brace gives much more support compared to the gen 2 tray because the old tray was weak and allowed the steering servo to move back and forth slapping against the tray da[More…]
5 of 6 customers found this review helpful.
Ben - Rating: 4 of 5 Stars! Verified Owner Wednesday, January 09, 2013
Losi really did a great job with this new radio tray design. I really like having both servos up and away from the heat and noise of the engine. The radio switch (should you choose to install one, they include a cover for the spot if you don't) has been moved all the way to the back of the tray, making it easy to reach a finger into the body to turn it on and off. It came with almost every piece needed to get all set up in case you happened to lose (or break) any parts from your old radio tra[More…]
1 of 1 customers found this review helpful.
Richard Infanti - Rating: 5 of 5 Stars! Sunday, March 04, 2012
Gen 3 tray is bang on. I must have option if running the TLR family of vehicles. Transponder goes in the receiver box where it belongs ;-)
1 of 1 customers found this review helpful.
Richard Nguyen - Rating: 4 of 5 Stars! Verified Owner Saturday, April 27, 2013
This is an excellent product but a pain to set up. This really helps with the life of the throttle servo moving it into a more comfortable position. Also the balance of the truggy is fantastic it will stay level with any kind of jump. It has two negative things about it firstly the reciever box is quite small running an airtronics reciever you can not fit any kind of transponder, secondly setting up is the worst thing to do but it is worth it. recommended to most people.
michael sanchez - Rating: 4 of 5 Stars! Verified Owner Wednesday, June 13, 2012
2nd Tray for me ! First one, a mount broke off during racing, located under the brake/throttle linkage to the chassis. The reciever box needs to be a little bigger to house the extra wires from servos so that they are not pinched when closing the lid ! The mounting under the throttle/ brake linkage wore out and stripped ! Overall durable / could be cheaper! This tray has increased steering but will not be noticed by a NOOB !
Andrew Irlmeier - Rating: 4 of 5 Stars! Verified Owner Wednesday, June 06, 2012
I had the same problem as Ivan. I had two JR servos which won't fit into the servo slots. I had to modify it a little to make them fit. (NO MATTER WHAT SERVO, IT IS A TIGHT FIT). I also did the bearing mod for the horn since there was a lot of slop. If you race at a high flying jumping track, this works great and relives some stress on the servos....
Niall Somerville - Rating: 4 of 5 Stars! Verified Owner Tuesday, May 08, 2012
Good radio tray but a few things really annoyed me... The instructions are horrible and specified screws that were too long to hold the servos in place. This lead to me stripping out the holes. They didn't mention anything about including 2 shorter screws in a seperate parts bag which would have prevented my problem. Also you need a little adapter to connect the new servo horn to your servo but the kit doesn't include these... Don't be stingy Losi and include all the parts required.
Javiheir Hogan - Rating: 5 of 5 Stars! Verified Owner Friday, April 27, 2012
I did the bearing mod and a new steering horn. I like this tray! I guess the only downside is that you have to remove six screws instead of four to remove the radio tray.
Juan Carlos Martin Fernandez - Rating: 3 of 5 Stars! Monday, April 09, 2012
Does anyone could tell me where you placed the transponder? Do they enter SAVOX 2 servos in the hole for the servo?
Shawn - Rating: 2 of 5 Stars! Verified Owner Wednesday, January 04, 2012
Losi didn't put much thought into this at all, there isn't even a spot for a transponder.. The instructions are horrible. We will probably buy the older version next time. I think they had a good idea but it wasn't thought out to well.
1 of 3 customers found this review helpful.
Ivan Arles Marin Lopez - Rating: 4 of 5 Stars! Verified Owner Sunday, January 08, 2012
I think Losi is in the good direction in innovation but...but, small question for LOSI engineer staff if you have two servos futaba, you have 20 x 2 = 40mm of width, if you have two JR servos you have 0.82" x 2 = 41.656 mm, in the first case futaba you NEED a HOLE more big than 40mm right? two servos isn't a pin element, i could't insert two servos in a hole the same form as i insert a pin in a hole. I find in my TLR4401 a hole of 40mm for two servos. In the second case i have a hole of 40mm to[More…]
0 of 3 customers found this review helpful.
kapitan kidlat - Rating: 3 of 5 Stars! Wednesday, January 04, 2012
it is overpriced and has no difference on 2nd gen, My 2nd gen radio tray serve me well actually i put my 11 year old ko propo on my throttle /brake and still working after using 12 gallons of fuel.. like the first reviewer no transponder placement like mugen or the 2nd gen.
0 of 3 customers found this review helpful.
Displaying 1 to 12 (of 12 reviews) Result Pages:  1