I bought this so I could run a 24t pinion on my SCTE. Very well designed/constructed. Locks the motor very securely with a much larger allen screw made from a harder material. Also, the dual bearing system is a HUGE improvement in stabilizing the center differential over the stock mount. Never using a stock mount again!
1 of 1 customers found this review helpful.
Andrew Roberts - Rating: Verified Owner
Sunday, August 03, 2014
Fits fine on the SCTE 2.0 chassis, a straight swap with zero mods, no idea what the hell the other reviewer on here was going on about, more than likely he had the mud guards on the wrong sides!!
Ultra4Racing - Rating: Verified Owner
Thursday, July 17, 2014
Awesome Product!!! Great Job King Headz, well worth the money. I have absolutley no regrets about my purchase and would do it again in a second. Thanks A-Main Hobbies...
bob traweek - Rating: Verified Owner
Monday, January 20, 2014
NICE PRODUCT. Can do away with plastic spacer under diff on SCTE 1.0. Stock chassis or TLR Flex. Lowers diff bout 2mm. ZERO vibration. Do yourself a favor and get the whole setup, F and R diff towers and brace with transponder mount. Very happy with mine.
Carl V - Rating: Verified Owner
Saturday, December 14, 2013
The King Headz Motor and Center Diff Mounts should be one of your first upgrades on the Ten-SCTE! The dual bearings takes almost all of the runout and freeplay in the center driveshafts. My only issue is some interference with the set screw for my Losi Mod 1 17-tooth pinion gear. I had to use the Dremel tool with a cutter to shave some material off of the motor adapter plate and also from the motor mount's bottom "arm" where the adapter plate slides into. The pinion gear's set screw sticks o[More…]
Daniel Kirkes - Rating: Verified Owner
Wednesday, September 04, 2013
Must have upgrade. Reduces power robbing, and damaging drive train vibration.
Aaron Kilander - Rating:
Thursday, February 28, 2013
Great product and very well made. Reduces all the original slop and wiggle. I use the Novak Mod 1 pinions as well, and never had any issue with mounting them at all. Not sure what the problem was regarding the other review since I use the same thing without any issues.
Miles Rosser - Rating: Verified Owner
Monday, February 18, 2013
I freaking love this thing. SCTE stock 3 stars. SCTE with all King Headz upgrtade =5 Stars
Fergus Fleming - Rating: Verified Owner
Friday, November 23, 2012
We purchased these to use in conjunction with the K.H. chassis and ran into a slight problem. We were using
The novac mod 1 opinions and the opinions interfered with the motor mount. Lucky enough to own a milling machine to fix the issue. We had to bore the motor plate 5mm larger than factory and then counter bore the mount almost to the engagement slides to get the set screw to clear. After 3 attempts to contact the maker all we were told was " we know"
1 of 2 customers found this review helpful.
Alan - Rating: Verified Owner
Saturday, September 01, 2012
10x stronger then the stock one and the screw it "BEEFY" and is builts with very high tolerances. A definite must have for any serious racer or basher!!
David Bruno - Rating: Verified Owner
Thursday, August 23, 2012
I purchased this and the kingz head center diff mount it elimates all that slop in the center diff works awesome !!!!!!!!!!!!!!!!
Eric M - Rating: Verified Owner
Tuesday, May 06, 2014
Dislaimer: I am using this on an SCTE 2.0.
First off, I had to grind some aluminum away from the lower right side of the motor mount, where it hits the plastic chassis plate guards. It does remove the slop from the center differential, but that could be mostly due to replacing the worn out bearings. We will see how long these hold up, but either way it should last much longer than the stock setup. My biggest beef is that the motor mount doesn't allow much adjustment for gear mesh. I'm using [More…]