Axial "Wraith" 1/10th 4WD Electric Rock Racer Kit

Read Reviews
5 (2)
Write a Review
With your purchase, receive at no cost:
BSG Kicker Button
This is the Axial "Wraith" 1/10th 4WD Electric Rock Racer Kit. The Wraith kit is an un-assembled version of the Wraith RTR. It includes upgraded components which make the Wraith kit a solid platform, ready for your electronics, allowing you to build a Wraith for your driving style. The Wraith features a realistic full tube-frame chassis design that is manufactured with high strength composite materials and has been built to go fast. This is NOT JUST A LOW SPEED ROCK CRAWLER!

The Axial Wraith changes the game with its impressive 1:1 scale looks, high-speed monster truck "bashability" and technical "crawl" capabilities. The realistic looks and performance make this vehicle the perfect blank canvas for the enthusiast looking for a vehicle to build upon. The Wraith can go in so many directions; desert sand, mountain trail runner, rock racer, mud bogger and any form of backyard bashing that can be dreamed up!

  • Full Tube Frame Composite Injection Molded Chassis: The most realistic high strength composite tube frame chassis on the market. This high strength composite plastic is impact resistant to help protect the Wraith from crash damage.
  • Universal Joint Axles: universal joint axles increase steering angle by 10 degrees over the stock dogbone/drive cup setup and provide smoother action for an efficient, higher performing drivetrain. The universal is oversized; similar to what you would see on 1/8 scale vehicles, and its made of hardened steel so its capable of handling extreme power.
  • Aluminum Lower Links: The lower suspension links are machined from aluminum to reduce flex and provide precise control over the roughest terrain. Measuring 7x87.5mm, these 7mm oversized diameter aluminum tubes are threaded at both ends for easy assembly and make for a durable 4-link suspension.
  • AR60 OCP-Axle (Off Center Pumpkin Design): The AR60 OCP-Axle is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The AR60 OCP-Axle tubes are reinforced and beefed up with a boxed-in axle truss to distribute stress over a larger area. The combination of these axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.
  • WBA Wild Boar Driveshafts: The metal to metal universal joint driveshaft system with splined plastic slider provides more durability than traditional driveshaft designs because it uses a screw shaft for a more positive lock to the output shaft.
  • 2.2 x 5.5 Axial RipSaw Tires in R35 Compound: The aggressive tread design, impressive ground clearance, and R35 compound offer a realistic look for the image-conscious scale crawler who is also looking to improve their performance game.
  • 2.2 Raceline Renegade Wheels: Raceline is by far the most popular wheel for extreme duty off-roading. Their ability to stand up to the abuse demanded by the full-size racer and their show quality finish is second to none. The Raceline Renegade gives the Wraith that authentic racing look as well as providing the strength to handle whatever you can dish out!
  • Corbeau LG1 Racing Seats: The Axial / Corbeau LG1 scale seats are fully functional with a unique to the market reclining ability! Accent decals included.
343mm (13.5")
Width: 295.3mm (11.6")
Height: 228.6mm (9")
Ground Clearance: 76.2mm (3")
Weight (no electronics): 2.22kg (4.9 lbs")

Included Upgrades:
  • Suspension Links: 7mm Aluminum Lower Links
  • Axles: Universal Joint Axles
  • Shock Springs: Purple (Soft)
  • Tires: R35 Compound (Soft)
  • Wheels: Black
  • Body: Clear body panels
  • Seats: Black
Needed to Complete:
  • Transmitter, Receiver & Servo
  • ESC & Motor
  • Battery & Charger
  • Polycarbonate Paint for Body
  • CA Glue
  • AA Batteries for Transmitter

This product was added to our catalog on September 29, 2011.

Verified Owner
Monday, Jul 22 2013 (about 2 years ago)
Axial "Wraith" 1/10th 4WD Electric Rock Racer Kit
This was the first kit I ever built and it really wasn't that hard, it's a sweet crawling truck and you can do heaps of mean flexing which is cool. And personally as far as electronics go, I would ideally get a 4 pole sensored brushless motor and as for a servo, don't be cheap, get something with some serious horsepower or else it just sucks at crawling. But overall there are a few upgrades that need to be done, if your wondering how much it will be with a few upgrades and a decent motor and servo it will be about $1350
Marvin R. Lyman
Verified Owner
Friday, Jul 12 2013 (about 2 years ago)
Axial "Wraith" 1/10th 4WD Electric Rock Racer Kit
Ya know it's kind of funny... when is enough, enough... my Wraith is my money pit... ha ha ha ...I have had it a long time, yet I keep upgrading it just for fun and to stay busy...It was the first of it's kind that I got into... the tubular frame style unit is fun to build... ya just have to get all the hard ware together before you begin... I thought it was a little big, for a 10th scale... so, now, I run alloy axles, knuckles, and rear lockouts, as well as steel drive lines, dual JR servos and 4WS system, with 3.2" wheels and 7" tires a Mamba Max Pro esc with a Monster 21T 550 extreme brushed motor and a 3S high discharge battery, with a DS4S transmitter, I had to modify the center plate some to accept the 550 sized motor... yet this worked very well... and the motor handles the power very well also...IT'S MY MONSTER SCALE OFF ROAD/CRAWLER with a gear ratio of 90T/12T...= it smooths out the 21T motor and always when you power up, you gear down...I LOVE MY HOMEMADE WRAITH...IT'S THE BEST I know there are other people who have invested more in their toys... as in the use of Vanquish Products... Good luck to ya and enjoy your hobby.... remember CRAWLING IS: the most costly RC adventure...
Henry Simas
Wednesday, Dec 31 2014 (8 months ago)
Axial "Wraith" 1/10th 4WD Electric Rock Racer Kit
just wanted to let every one know sells a duel motor plate so you can run two brushed motor for about 17 bucks. it doubles the horse power and axial motors are cheaper than most brushless motors and does the job no problem. I am currently running one in my scx10 and have had 0 issues with it using stock motors and esc with 7.4 volt lipo at 5000mah. run time is about 45 min. hope this was helpful
This item is discontinued and no longer available for purchase. You may want to search our site for a similar item.
Manufacturer Info
Browse other products from Axial