Castle Creations Mamba XL2 1/5 ESC/Motor Combo w/Neu-Castle 2028 (780kV)
Are you ready to experience the incredible torque and speed of Castle electric drive in your 1/5th scale buggy, truck or on road car? The Mamba XL2 is the only controller on the market able to handle the loads required to power these extremely heavy vehicles to insane speeds. The Mamba XL2 features all of the standard Mamba series programming features, PLUS data logging! Use the data from the controller to measure critical parameters such as your battery volts, battery ripple voltage, amp draw, motor rpm, and controller temperature. This is a great way to make sure that the rest of your setup is performing within its limits.
Have you ever seen a Baja doing 60mph? Castle's engineers have always been able to make 1/5 vehicles like the Baja go, but were never satisfied that the systems would hold up to extended usage that these vehicles encounter. The final result was the whopping Neu-Castle 2028. This motor can easily run in the 10 horsepower range! The motor is sealed for survival in the dust and dirt that Bajas call home. The rotor is assembled from four individual magnets and the stator is a highly advanced slotted design made from the highest quality laminations. The shaft is 8mm, no worries of breaking this shaft. Want to run a bit cooler? Check out the CC Blower for 20 Series motors.
- Developed for 1/5 scale and other large scale vehicles
- Only controller on the market able to handle 1/5 scale applications
- Uses "Data Logging" to measure critical parameters such as battery voltage, ripple voltage, amp draw, motor rpm, and controller temperature
- High quality Japanese sealed bearings
- 4 pole neodymium magnets
- super thin stator laminations using high quality steel
- Max Cells: 8S LiPo (33.6V)
- BEC: 5 Amp
- Size (LxWxH): 4.1x2x1.7" (104.1x52x43.8mm)
- Weight w/ Wires: 8.5oz (241g)
- Weight (no wires): 5.6oz (158.7g)
- Wire Gauge to Motor: 8AWG
- Wire Gauge to Battery: 8AWG
- Length: 4.4" (113.2mm)
- Diameter: 2.2" w/Fins (57mm)
- Shaft Size: 8mm dia x 30mm long
- Weight: 44 oz
- Max RPM: 30,000
- kV: 780
- Peak Efficiency: 92%
- Controller Required: Sensorless Only
- Motor Mount Spacing: 30mm
This product was added to our catalog on December 17, 2013.
Customers that bought this also purchased...
Super Saver Shipping!