Novak Eiger ESC/Rock Star Brushed Motor Crawler System (55T)
This is the Novak Eiger Crawling ESC/Rock Star Brushed Motor Crawler System, with a 55 turn Rock Star motor. The Eiger mountain towers amongst the giants of the Swiss Alps topping some 13,000 plus feet. Let Novak’s Eiger 2S/3S Crawling Brush ESC power you to mountain-high adventures as well! The tiny Eiger is packed with all the features you need, and is easier to use and more adjustable than any ESC in its class. Tuning on the rocks is as easy as 1-2-3. No programmers or wires to fuss with! With four on-board adjustments, the Novak Eiger Crawling ESC can be customized to suit any type of crawling.
The Eiger is compatible with 2S LiPo packs and has a built-in, heavy-duty 2-amp BEC that will power high torque single servo setups with ease. The Eiger is also compatible with 3S LiPo packs! Simply install an external BEC and enjoy the wheel-spinning good times of 11.1 volts! Yee Haw!
NOT JUST FOR CRAWLING
The Eiger ESC comes ready to crawl, and will default to the normal rock crawling settings: forward and reverse with high-power drag brake. Not only can you adjust the power of your Drag/Hill Brakes via the simple on-board programming, but you can turn them off completely. This will set the speed control in normal “Basher” mode with forward and brake operation -just like a regular, non-crawling ESC! It’s the best of both worlds. Crawling and bashing!
ROCK STAR EXPERT CRAWLING BRUSHED MOTOR
These new Brushed Crawling motors replace Novak's previous 45T and 55T Brushed motors with newer and more durable technology for problem free crawling. They are Sagami built with high-quality materials. Rock Star motors are available in high turn counts (35T, 45T, and 55T) for maximum torque and long run times!
Rock Stars are completely rebuildable with an easily accessible commutator and replaceable brushes and springs. The brushed motor is also outfitted with dual-ball bearings for a smooth and efficient ride, and high strength magnets for unmatched brush-motor performance. The motors are thoroughly tested by Novak to ensure optimum performance.
- Designed especially for the demands of crawling vehicles to maneuver over the toughest terrain, and also works great for non-crawling applications
- Compact and lightweight design
- Compatible with Novak Terra Claw, Rock Star and other 540-size & 380-size brushed motors
- 4 adjustable parameters: Brake Power/Throttle Mode (5 settings), Dead Band (5 settings), Drive Frequency (5 settings), and Voltage Cut-Off
- Water-resistant case with silicone gasket seal to help keep out the elements
- Built-In Voltage Cut-Off Circuitry prevents damage to LiPo batteries (auto detects 2S or 3S)
- Built-In 6V output for optional accessory fan or other detail items such as running lights
- User friendly One-Touch programming interface with four multi-colored status LEDs to help personalize the speed control's settings
- Novak's One-Touch Set-Up™ for quick, easy transmitter set-up
- Heavy-duty, internal 2A BEC for high-torque single servo applications. Don’t let the specs fool you—all ESC’s BECs are not created equal. The Eiger’s 2A BEC will go toe-to-toe with many other higher rated units.
- Three ESCs in one—The Eiger has a non-crawling, Basher Mode and can be used in any 1/10th, 1/12th, 1/16th, or 1/18th application with a 20T or higher brushed motor. Additionally, The Eiger has a Servo Mode for forward and reverse directions (no brakes) that can be used for robotic applications.
- Built-in diagnostic temperature monitoring lets you quickly check the ESC's operating temperature at any time
- Thermal Overload Protection circuitry to protect the ESC from overheating
- Gold-plated direct-solder wiring tabs for flexible soldering options
- Plug-and-Play—The Eiger is factory-wired with Tamiya® battery plug & gold-plated Bullet motor plugs.
- Factory installed power capacitor
- User-replaceable input harness
- Meets RoHS compliance and includes a 1 Year Manufacturers Warranty
- Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
Rock Star Features:
- Specifically designed for R/C vehicles that require precise movement & control
- High number of turns for excellent torque and long-run times
- Easily accessible commutator for easy maintenance
- Direct-Solder Wiring Tabs for flexible soldering options
- Sagami Built in Japan
- Tested by Novak in Irvine, Calif.
Motor Compatibility: Brushed only
Fwd/Brk/Rev: F/Drag Brakes/R (crawling modes); F/B (basher mode); F/R (servo mode)
Input Cells: 2-3S LiPo or 4-9 NiMH
Size: 1.15x0.95x0.66” (29.0x24.3x16.8mm)
Weight (w/o wires): 0.64 oz. (18.1g)
On-Resistance: 0.0013 ohms
Motor Limit (540): Eiger: 20T or higher (2S); 35T or higher (3S) brushed motor
Motor Limit (380): Any 380-size brushed motor
BEC: 6V DC / 2A
Wire Size: 14G Super-Flex Copper-Strand Silicone Wire
Battery/Motor Plug: Tamiya-style battery & gold-plated Bullet motor plugs factory installed
Status LEDs: 4 (multi-colored)
Rock Star Specifications:
Number of Turns: 55 (#3557)
Design: Stand-up Brushed
Input Voltage: 2S Li-Po cells or 4-7 cells (1.2V/cell)
Motor Size: 2.07x1.42" (52.7x36.1mm)
Shaft Diameter: 0.125" (3.2mm) [accepts all 1/8" pinion gears]
Bearing: Standard 3/8" x 1/8"
Motor Weight: 5.97 oz., 169 grams
Magnet: High-Strength Ferrite
This product was added to our catalog on January 27, 2012.
Customers that bought this also purchased...
FREE Shipping Eligible!