Align 3GX Programmable Flybarless System
This is the Align 3GX Programmable Flybarless System, and is intended for use with nitro or electric powered helicopters of any size from 200 to 700. The redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create an immediate impact on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and features two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system. Based on the 3G FL760 manual setup process, the 3GX can be setup manually in a few minutes, while the computer setup software directs the user through a step by step graphically illustrated setup process that allows for quick setups without omitting any steps. Plus, a library of pre-configured 3GX settings are available specifically for the T-Rex series of helicopters, allowing pilots to achieve the most optimal setup for their helicopters. With the soon to be released Bluetooth connectivity kit, the 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down. Settings export feature allows custom settings to be shared amongst friends.
Three levels of flight mode are available on the 3GX to provide a different feel for beginners and advanced pilots. The 3GX features custom parameters that have been opened up to allow pilots to fine tune numerous settings for swashplate and rudder. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including 90, 120, 135, and 140 degrees swashplates. The 3GX utilizes the highest specifications gyroscope sensors, allowing it to be used in the harshest conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to the last generation 3G. This is proven with a more stable hover and during highly aerobatic routines. Additionally, the superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
The 3GX utilizes a 16 bit processor which is 4 times faster than the previous generation, along with completely re-written firmware. The result is a dramatic stability improvement from the previous generation, with stability that rivals a flybarred helicopter, yet still posses explosive agility. With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip maneuvers are easily accomplished with precision. With 3GX's built in Align RCE-G600 governor function, no external governor is needed, helping to reduce electronic wire clutter. 3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This excellent control feel will allow pilots of any skill level to experience the perfect integration between 3GX and helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly available position hold gyro system utilizes only 6 sensors, 3GX’s total of 10 sensors ensure positioning of helicopter with superior accuracy, providing the ultimate solution for aerial photography or other special purposes.
- Supports Wide/Narrow Bandwidth Digital and brushless servos
- Spektrum and JR Satellite antennas support (Replaces original factory receiver)
- Futaba S.BUS system support
- Built in governor function
- Compatible with 1024/2048 resolution Spektrum receivers
- Supports 90/120/135/140 CCPM swashplates
- Field setup without the use of a PC
- Compatible with 2 to 5 blades rotor heads
- Support up to 6 servos
- Automatic servo type recognition
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm Size
Maximum working voltage: 8.5V
- (1) USB Link cable set
- (1) USB extension cable
- (3) Signal wire
- (1) Bind Plug
- (1) 3GX Sticker
- (1) Installation CD
This product was added to our catalog on June 15, 2011.
- Align T-Rex 250
- Align T-Rex 250 Pro
- Align T-Rex 450 Plus
- Align T-Rex 450 Pro
- Align T-Rex 450 Pro V2
- Align T-Rex 450 Sport
- Align T-Rex 450 Sport V2
- Align T-Rex 450SA
- Align T-Rex 450SE
- Align T-Rex 450SE V2
- Align T-Rex 450X
- Align T-Rex 450XL
- Align T-Rex 500
- Align T-Rex 500 Pro
- Align T-Rex 550
- Align T-Rex 600E
- Align T-Rex 600E Pro
- Align T-Rex 600N
- Align T-Rex 700E
- Align T-Rex 700N
- Align T-Rex 800E
Customers that bought this also purchased...
FREE Shipping Eligible!