Browse Departments

Tekin RS Gen2 Sensored Brushless ESC/Motor Combo (8.5T)

[TEKTT2428]
With your purchase, receive at no cost:

This is the Tekin RS Gen2 Sensored Brushless ESC/Motor Combo with an included 8.5 Turn Modified Series Tekin Gen2 Motor. The Tekin RS legacy continues with the GEN2 brushless speed control, the next generation in intelligent motor drive technology. The RS GEN2 is fitted with state of the art components to deliver what racers demand; reliability, precise control and unmatched power handling capability. Packed with updates, the RS GEN2 features a programmable 6.0-7.4V high-voltage BEC, an EZ Access Port for HotWire communication and Data-logging capabilities, and its all wrapped up in a pint sized package. Rated for 8.5 turn motors and higher, the GEN2 is the perfect ESC for both vetran and novice racers.

The Gen2 modified series motors feature significant changes compared to the previous generation and are tuned specifically for modified racing. The 8.5 motors come standard with a 13mm rotor, providing the horsepower needed for mod class racing.

ESC Features:

  • Couple the RS GEN2 with a Redline GEN2 brushless motor for the ultimate race package!
  • Ultra-smooth and Precise Throttle and Braking Control
  • Compatible with Sensored/Sensorless Brushless and Brushed Motors
  • Easily Access Programming, Anywhere, Anytime
  • Datalogging Capability
  • High Voltage Programmable BEC
  • EZ Access HotWire Programming Port
  • HotWire PC Interface for Advanced Programming and Updating
  • D2: Dual Drive Mode Technology
  • On-Board Temperature Indicator
  • HDAC: High Density Copper PCB's
  • Sensor Plug for Precise Commutation with all Motors
  • Gold-plated Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune™ Programming
  • One-Touch Radio Calibration

ESC Programming Features:

  • High Voltage BEC (6.0v/7.4v)*
  • Drag Brake (13 steps)
  • Brake / Reverse Strength (13 steps)
  • Current Limiter (none + 12 steps)
  • Neutral Width (13 steps)
  • Timing Profiles (5 preset - 2 custom*)
  • Adjustable Throttle and Brake Minimums
  • Custom Throttle Curves
  • Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
  • Voltage Cutoffs (none, 2S, 3S, Custom)
  • Timing Boost and Turbo when used with Hotwire
  • ROAR Race Spec "Blinky" Mode
  • Save, Load and Share custom ESC setup files
  • Extensive Tuning via Tekin HotWire PC Interface

*NOTE: Requires HotWire USB Interface (TEKTT1450) - Sold Separately

Motor Features:

  • 13mm Rotor
  • CNC Machined T 6061 Billet Aluminum Heatsink Can
  • Neodymium Sintered Magnet
  • Precision Engineered for Maximum Energy Conversion
  • High Purity Copper Windings Maximize Conductivity
  • Low Resistance, High Power Solder Tabs
  • Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
  • Anodized Endbell plates maximize corrosion and wear resistance
  • High RPM precision bearings
  • Rebuildable Design
  • Solderless Sensor PCB replacement
  • Adjustable Timing

ESC Specifications:
Controls: Forward/Brake/Reverse
Input Voltage: 4-9 Cells, 2S-3S Lipo
BEC: 6.0v / 7.4v 5.5amps
Motor Limit Brushless Mode: 8.5 Turn, 540 2-pole (36mm)
Motor Limit Brushed Fwd Only Mode: 10 Turn
Motor Limit Brushed Fwd/Rev Mode: 12 Turn
Timing Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1x1.3x.51" (25.4x33x12.9mm)
Weight: 2.0oz / 48g w/wire

Motor Specifications:
Turn: 8.5
kV: 5350
Rotor: 13mm
Weight: 6.3oz (180g)
Shaft Dimensions: 3.2x15.3mm
Motor Diameter: 35.85mm/1.40"
Motor Length: 51.8mm/2.03"
Bearing Dimensions:
Front: 4x13x5mm
Rear: 1/8x3/8x5/32"

This product was added to our catalog on April 16, 2013.

Related Products

Super Saver Shipping!

List Price: $405.00
You Save: $155.01 (38%)
Price: $249.99
Quantity:
In Stock!
This item is eligible for Super Saver Shipping Learn More
This item earns up to 250 VIP Reward Points Learn More

Manufacturer Info

Browse other products from Tekin